If there is an Error field in the response, it means that the API call failed. For example:
{
"Response": {
"Error": {
"Code": "AuthFailure.SignatureFailure",
"Message": "The provided credentials could not be validated. Please check your signature is correct."
},
"RequestId": "ed93f3cb-f35e-473f-b9f3-0d451b8b79c6"
}
}Code in Error indicates the error code, and Message indicates the specific information of the error.
| Error Code | Description |
|---|---|
| ActionOffline | This API has been deprecated. |
| AuthFailure.InvalidAuthorization | Authorization in the request header is invalid. |
| AuthFailure.InvalidSecretId | Invalid key (not a TencentCloud API key type). |
| AuthFailure.MFAFailure | MFA failed. |
| AuthFailure.SecretIdNotFound | Key does not exist. Check if the key has been deleted or disabled in the console, and if not, check if the key is correctly entered. Note that whitespaces should not exist before or after the key. |
| AuthFailure.SignatureExpire | Signature expired. Timestamp and server time cannot differ by more than five minutes. Please ensure your current local time matches the standard time. |
| AuthFailure.SignatureFailure | Invalid signature. Signature calculation error. Please ensure you’ve followed the signature calculation process described in the Signature API documentation. |
| AuthFailure.TokenFailure | Token error. |
| AuthFailure.UnauthorizedOperation | The request is not authorized. For more information, see the CAM documentation. |
| DryRunOperation | DryRun Operation. It means that the request would have succeeded, but the DryRun parameter was used. |
| FailedOperation | Operation failed. |
| InternalError | Internal error. |
| InvalidAction | The API does not exist. |
| InvalidParameter | Incorrect parameter. |
| InvalidParameterValue | Invalid parameter value. |
| InvalidRequest | The multipart format of the request body is incorrect. |
| IpInBlacklist | Your IP is in uin IP blacklist. |
| IpNotInWhitelist | Your IP is not in uin IP whitelist. |
| LimitExceeded | Quota limit exceeded. |
| MissingParameter | A parameter is missing. |
| NoSuchProduct | The product does not exist. |
| NoSuchVersion | The API version does not exist. |
| RequestLimitExceeded | The number of requests exceeds the frequency limit. |
| RequestLimitExceeded.GlobalRegionUinLimitExceeded | Uin exceeds the frequency limit. |
| RequestLimitExceeded.IPLimitExceeded | The number of ip requests exceeds the frequency limit. |
| RequestLimitExceeded.UinLimitExceeded | The number of uin requests exceeds the frequency limit. |
| RequestSizeLimitExceeded | The request size exceeds the upper limit. |
| ResourceInUse | Resource is in use. |
| ResourceInsufficient | Insufficient resource. |
| ResourceNotFound | The resource does not exist. |
| ResourceUnavailable | Resource is unavailable. |
| ResponseSizeLimitExceeded | The response size exceeds the upper limit. |
| ServiceUnavailable | Service is unavailable now. |
| UnauthorizedOperation | Unauthorized operation. |
| UnknownParameter | Unknown parameter. |
| UnsupportedOperation | Unsupported operation. |
| UnsupportedProtocol | HTTP(S) request protocol error; only GET and POST requests are supported. |
| UnsupportedRegion | API does not support the requested region. |
| Error Code | Description |
|---|---|
| FailedOperation.CreateGlobalAcceleratorFailed | Failed to create a global acceleration instance. Retry your request. If the problem persists, contact Tencent Cloud customer service. |
| FailedOperation.InsufficientResources | Insufficient resources to create the port range. |
| InvalidParameter.ApplicationLayerListenerCannotCarryParameters | Layer-7 listeners do not support carrying the parameter %(value)s. |
| InvalidParameter.DisableHealthCheckNotCarryParameters | Health check is disabled for the terminal node group configuration. Carrying the parameter %(parameter)s is forbidden. |
| InvalidParameter.EnableHealthCheckNotCarryParameters | Health check is disabled for the terminal node group, so the parameter %(parameter)s cannot be carried. |
| InvalidParameter.EndpointGroupCheckTypeHttpCarryParameters | When configuring HTTP check, you need to carry the parameter %(value)s. |
| InvalidParameter.HttpListenerCannotCarryParameters | Http listeners do not support carrying the parameter %(value)s. |
| InvalidParameter.HttpsListenerCanCarryParameters | |
| InvalidParameter.HttpsOriginServerProtocolSupportsParameters | The %(value)s parameter is supported only for the HTTPS back-to-source protocol. |
| InvalidParameter.InputDuplicateWithExistingData | The input parameter %(key)s in the request duplicates existing data. |
| InvalidParameter.InputMustExistOne | The in-progress request must have one of the %(value)s input parameters. |
| InvalidParameter.InputOutOfRange | The in-progress request input parameter %(key)s is required and within the %(value)s range. |
| InvalidParameter.InputRepeat | The input parameter %(key)s in the request has duplicate values. |
| InvalidParameter.OnlyEndpointGroupCheckTypeHttpCarryParameters | The %(value)s parameter is required only when HTTP check is configured. |
| InvalidParameter.SinglePort | Only a single port is supported. |
| InvalidParameter.TcpEndpointGroupCannotCarryParameters | Tcp terminal node groups do not support carrying the parameter %(value)s. |
| InvalidParameter.TcpListenerCarryParameters | |
| InvalidParameter.TransportLayerEndpointGroupCannotCarryParameters | L4 terminal node groups do not support carrying the parameter %(value)s. |
| InvalidParameter.TransportLayerListenerCannotCarryParameters | Layer-4 listeners do not support carrying the parameter %(value)s. |
| InvalidParameter.UdpEndpointGroupCannotCarryParameters | Udp terminal node group does not support carrying the parameter %(value)s. |
| InvalidParameterValue.AsciiCharacters | Can only be printable ASCII characters. |
| InvalidParameterValue.CertificatesConflict | Certificate %(value)s duplicates an existing cert. |
| InvalidParameterValue.Empty | Parameter %(parameter)s cannot be empty. |
| InvalidParameterValue.ForwardingPolicyHostConflict | Layer-7 forwarding policy domain name duplicates an existing one. |
| InvalidParameterValue.ForwardingRulePathConflict | The Path of the Layer 7 forwarding rule duplicates an existing one. |
| InvalidParameterValue.InstanceMismatch | The instance object %(value)s has a mismatched relationship. |
| InvalidParameterValue.InstanceName | Instance name must start with an uppercase/lowercase character or Chinese character, and support digits, periods, hyphens, and underscores. |
| InvalidParameterValue.InternalReservedFields | |
| InvalidParameterValue.InvalidParameterValueOffset | |
| InvalidParameterValue.LengthRange | |
| InvalidParameterValue.LimitExceeded | The number of %(parameter)s values %(value)s exceeds the limit. It cannot be greater than %(limit)s. |
| InvalidParameterValue.ListenerPortNotEqual | The terminal node group listening port should be consistent with the listener port that the terminal node group belongs to. |
| InvalidParameterValue.LogsetNotExist | Logset topic %(value)s does not exist. |
| InvalidParameterValue.Malformed | Parameter value %(value)s of %(parameter)s is invalid. A correct and complete value is in the form of %(template)s. |
| InvalidParameterValue.NotMappingManyPort | A listener port cannot be mapped to multiple origin ports currently. |
| InvalidParameterValue.NotTencentRegion | |
| InvalidParameterValue.NotWithinPublicNetwork | Parameter %(value)s is not in the allowed public IP ranges. |
| InvalidParameterValue.Range | The value %(value)s of the parameter %(parameter)s must be within the range %(value_range)s. |
| InvalidParameterValue.SegmentPortRange | FromPort %(fromPort)s should be less than or equal to ToPort %(toPort)s. |
| InvalidParameterValue.SpecialCharacters | Parameter value %(value)s cannot contain special characters %(key)s. |
| InvalidParameterValue.SpecificCharacters | Parameter value %(value)s can only contain characters %(key)s. |
| InvalidParameterValue.TaskNotFound | Asynchronous task ID does not exist. |
| InvalidParameterValue.TcpSeriesListenerPortEqual | The current TCP protocol series listener port duplicates an existing listener port. |
| InvalidParameterValue.ThirdAreaListenerPortEqual | Currently, the global acceleration instance has third-party node acceleration regions configured. The listener port cannot be the same. |
| InvalidParameterValue.ThirdAreaListenerPortSegment | Currently, the global acceleration instance does not support configuring listener port ranges for third-party nodes. |
| InvalidParameterValue.TooLong | Parameter value %(value)s length cannot be greater than %(max_size)s. |
| InvalidParameterValue.UdpSeriesListenerPortEqual | The current UDP listener port is duplicated with an existing listener port. |
| InvalidParameterValue.VpgHaGroupNotFound | |
| InvalidParameterValue.WrongAttributionRelationship | |
| MissingParameter.ApplicationLayerEndpointGroupParameter | Currently a layer-7 terminal node group. The request is missing the required parameter %(parameter)s. |
| MissingParameter.CustomCheckTypeParameter | When the terminal node group configuration is set to custom check, the request is missing required parameter %(parameter)s. |
| MissingParameter.EnableHealthCheckParameter | Health check is enabled for the terminal node group configuration. The request is missing the required parameter %(parameter)s. |
| MissingParameter.InternalNetworkSource | |
| MissingParameter.IspType | |
| ResourceInUse.EdgeAccelerateArea | |
| UnsupportedOperation.AccelerateRegionRepeat | Acceleration region %(value)s already exists. |
| UnsupportedOperation.AccountFrozen | Account frozen. The current operation is not supported. |
| UnsupportedOperation.AlreadyEnableCrossBorder | Cross-border is enabled. Repeated operation is not supported. |
| UnsupportedOperation.ApplicationLayerEndpointGroupNotDelete | The default layer-7 forwarding rule cannot be deleted. |
| UnsupportedOperation.BillingFailed | Sorry, your operation cannot be completed temporarily. Please retry later or contact customer service. |
| UnsupportedOperation.CaCertificatesOperate | No operations allowed on the CA certificate. |
| UnsupportedOperation.CertificateNotCa | |
| UnsupportedOperation.CrossBorderPromiseNotSigned | The cross-border commitment letter is not signed. The current operation is not supported. |
| UnsupportedOperation.CurrentAccountNotAllowed | The current account does not support this operation. |
| UnsupportedOperation.DefaultCertificatesOperate | No operations allowed on the default certificate. |
| UnsupportedOperation.DefaultForwardingPolicyOperate | No operations are allowed for the default layer-7 forwarding policy rules. |
| UnsupportedOperation.DefaultForwardingRuleOperate | The default Layer 7 forwarding rule is not allowed to be modified: %(value)s. |
| UnsupportedOperation.DomainMismatched | The replacement certificate domain name does not match the old certificate domain name. |
| UnsupportedOperation.DuplicateInstanceStatus | Please do not repeat the operation on the current instance status. |
| UnsupportedOperation.EnableCrossBorder | Cross-border type settings are not supported for the current user. |
| UnsupportedOperation.ExistAcceleratorArea | An acceleration region exists. The current operation is not supported. |
| UnsupportedOperation.ExistAcceptAclPolicy | A default access control policy that permits all traffic through the access channel exists. The current operation is not supported. |
| UnsupportedOperation.ExistAccessLog | An access log exists. The current operation is not supported. |
| UnsupportedOperation.ExistDropAcceptAclRule | An access rule with a deny policy is configured. The current operation is not supported. |
| UnsupportedOperation.ExistForwardingRule | A Layer 7 forwarding rule is configured with the terminal node group %(value)s. The current operation is not supported. |
| UnsupportedOperation.ExistListener | A listener exists. The current operation is not supported. |
| UnsupportedOperation.ExistThirdPartyNodes | A third-party node exists. Configuring a default connection policy to permit ALL traffic is not allowed. |
| UnsupportedOperation.ForwardGroupForwardingRuleUnsupportedDefaultEndpointGroup | Forwarding rules cannot be configured with a default terminal node group. |
| UnsupportedOperation.HttpVersionInconsistent | The maximum HTTP protocol version of the listener and terminal node group should be consistent. |
| UnsupportedOperation.InstanceNotRunning | The instance is not in the running state. The current operation is not supported. |
| UnsupportedOperation.InstanceStateNotAllowedOperate | Current instance status does not allow this operation. |
| UnsupportedOperation.InsufficientFunds | The account balance is insufficient. |
| UnsupportedOperation.InternalEndpointFeatureNotEnabled | The current global acceleration instance does not have the private network origin-pull feature enabled. |
| UnsupportedOperation.Ipv6NotSupport | IPv6 is not supported. |
| UnsupportedOperation.ListenerPortSegment | The current account does not support port range configuration. |
| UnsupportedOperation.NotAuthorization | Not supported. Please grant the permission first to enable the log task. |
| UnsupportedOperation.NotSetCrossBorderType | The global acceleration instance has no cross-border type set. Cross-border acceleration regions or terminal node groups cannot be created. |
| UnsupportedOperation.OnlyInternalClb | |
| UnsupportedOperation.OnlyTcpListenerSupportToa | For TCP listeners only, client IP can be obtained through TOA. |
| UnsupportedOperation.RequestParametersError | Request parameter error. The current operation is not supported. Error message: %(info)s. |
| UnsupportedOperation.SameDomain | The current operation makes the terminal node group domain name the same as the global acceleration instance domain. The current operation is not supported. |
| UnsupportedOperation.SamePublicIp | The current operation makes the terminal node group domain name match the public IP address of the global acceleration instance's acceleration region. The current operation is not supported. |
| UnsupportedOperation.TOAFeatureNotEnabled | The TOA feature is not enabled for the current global acceleration instance. Contact Tencent Cloud customer service to submit a request. |
| UnsupportedOperation.ThirdAreaHavePortEqualListener | |
| UnsupportedOperation.ThreeNetworksAccelerateAreas | Creation of a triple-network acceleration region is not supported. |
| UnsupportedOperation.ThreeNetworksEndpointGroup | Creation of a triple-network terminal node group is not supported. |
| UnsupportedOperation.TransportLayerUnsupportedOperateForwardingPolicy | Layer-4 listeners do not support creation of forwarding policies. |
| UnsupportedOperation.UdpListenerNotSupportProxyProtocol | |
| UnsupportedOperation.UnableCreateThirdPartyNodes | Creation of third-party nodes is not supported. |
| UnsupportedOperation.UnableCrossBorder | Currently, cross-border acceleration regions or terminal node groups cannot be created for global acceleration instances. |
| UnsupportedOperation.UnlawfulCertificate | |
| UnsupportedOperation.VirtualEndpointGroupUnsupportedTcpAndUdp | Virtual terminal node groups do not support Tcp and Udp terminal node groups. |
피드백