tencent cloud

Tencent Real-Time Communication

소식 및 공지 사항
제품 업데이트
Tencent Cloud 오디오/비디오 단말 SDK 재생 업그레이드 및 권한 부여 인증 추가
TRTC 월간 구독 패키지 출시 관련 안내
제품 소개
제품 개요
기본 개념
제품 기능
제품 장점
응용 시나리오
성능 데이터
구매 가이드
Billing Overview
무료 시간 안내
Monthly subscription
Pay-as-you-go
TRTC Overdue and Suspension Policy
과금 FAQ
Refund Instructions
신규 사용자 가이드
Demo 체험
Call
개요(TUICallKit)
Activate the Service
Run Demo
빠른 통합(TUICallKit)
오프라인 푸시
Conversational Chat
온클라우드 녹화(TUICallKit)
AI Noise Reduction
UI 사용자 정의
Calls integration to Chat
Additional Features
No UI Integration
Server APIs
Client APIs
Solution
ErrorCode
릴리스 노트
FAQs
라이브 스트리밍
Billing of Video Live Component
Overview
Activating the Service (TUILiveKit)
Demo 실행
No UI Integration
UI Customization
Live Broadcast Monitoring
Video Live Streaming
Voice Chat Room
Advanced Features
Client APIs
Server APIs
Error Codes
Release Notes
FAQs
RTC Engine
Activate Service
SDK 다운로드
API 코드 예시
Usage Guidelines
API 클라이언트 API
고급 기능
RTC RESTFUL API
History
Introduction
API Category
Room Management APIs
Stream mixing and relay APIs
On-cloud recording APIs
Data Monitoring APIs
Pull stream Relay Related interface
Web Record APIs
AI Service APIs
Cloud Slicing APIs
Cloud Moderation APIs
Making API Requests
Call Quality Monitoring APIs
Usage Statistics APIs
Data Types
Appendix
Error Codes
콘솔 가이드
애플리케이션 관리
사용량 통계
모니터링 대시보드
개발 보조
Solution
Real-Time Chorus
FAQs
과금 개요
기능 관련
UserSig 관련
방화벽 제한 처리
설치 패키지 용량 축소 관련 질문
Andriod 및 iOS 관련
Web 관련
Flutter 관련
Electron 관련
TRTCCalling Web 관련
멀티미디어 품질 관련
기타 질문
Protocols and Policies
컴플라이언스 인증
보안 백서
정보 보안에 관한 참고 사항
Service Level Agreement
Apple Privacy Policy: PrivacyInfo.xcprivacy
TRTC 정책
개인 정보 보호 정책
데이터 처리 및 보안 계약
용어집

TXDeviceManager

PDF
Mode fokus
Ukuran font
Terakhir diperbarui: 2026-03-27 15:38:15
Copyright (c) 2021 Tencent. All rights reserved.

Module: audio/video device management module

Description: manages audio/video devices such as camera, mic, and speaker.
TXDeviceManager

TXDeviceManager

FuncList
DESC
Querying whether the front camera is being used.
Switching to the front/rear camera (for mobile OS).
Getting the maximum zoom ratio of the camera (for mobile OS).
Setting the camera zoom ratio (for mobile OS).
Querying whether automatic face detection is supported (for mobile OS).
Enabling auto focus (for mobile OS).
Adjusting the focus (for mobile OS).
Enabling/Disabling flash, i.e., the torch mode (for mobile OS).
Setting the audio route (for mobile OS).
Set the exposure parameters of the camera, ranging from - 1 to 1.
Set camera acquisition preferences.
Setting the system volume type (for mobile OS).

StructType

FuncList
DESC
Camera acquisition parameters.

EnumType

EnumType
DESC
System volume type.
Audio route (the route via which audio is played).
Camera acquisition preferences.

isFrontCamera

isFrontCamera
Querying whether the front camera is being used.

switchCamera

switchCamera
int switchCamera
(boolean frontCamera)
Switching to the front/rear camera (for mobile OS).

getCameraZoomMaxRatio

getCameraZoomMaxRatio
Getting the maximum zoom ratio of the camera (for mobile OS).

setCameraZoomRatio

setCameraZoomRatio
int setCameraZoomRatio
(float zoomRatio)
Setting the camera zoom ratio (for mobile OS).
Param
DESC
zoomRatio
Value range: [1, 5]. 1 indicates the widest angle of view (original), and 5 the narrowest angle of view (zoomed in).The maximum value is recommended to be 5. If the value exceeds 5, the video will become blurred.

isAutoFocusEnabled

isAutoFocusEnabled
Querying whether automatic face detection is supported (for mobile OS).

enableCameraAutoFocus

enableCameraAutoFocus
int enableCameraAutoFocus
(boolean enabled)
Enabling auto focus (for mobile OS).
After auto focus is enabled, the camera will automatically detect and always focus on faces.

setCameraFocusPosition

setCameraFocusPosition
int setCameraFocusPosition
(int x

int y)
Adjusting the focus (for mobile OS).
This API can be used to achieve the following:
1. A user can tap on the camera preview.
2. A rectangle will appear where the user taps, indicating the spot the camera will focus on.
3. The user passes the coordinates of the spot to the SDK using this API, and the SDK will instruct the camera to focus as required.
Param
DESC
position
The spot to focus on. Pass in the coordinates of the spot you want to focus on.
Note
Before using this API, you must first disable auto focus using enableCameraAutoFocus.
Return Desc:
0: operation successful; negative number: operation failed.

enableCameraTorch

enableCameraTorch
boolean enableCameraTorch
(boolean enable)
Enabling/Disabling flash, i.e., the torch mode (for mobile OS).

setAudioRoute

setAudioRoute
int setAudioRoute
(TXAudioRoute route)
Setting the audio route (for mobile OS).
A mobile phone has two audio playback devices: the receiver at the top and the speaker at the bottom.
If the audio route is set to the receiver, the volume is relatively low, and audio can be heard only when the phone is put near the ear. This mode has a high level of privacy and is suitable for answering calls.
If the audio route is set to the speaker, the volume is relatively high, and there is no need to put the phone near the ear. This mode enables the "hands-free" feature.

setExposureCompensation

setExposureCompensation
int setExposureCompensation
(float value)
Set the exposure parameters of the camera, ranging from - 1 to 1.

setCameraCapturerParam

setCameraCapturerParam
void setCameraCapturerParam
(TXCameraCaptureParam params)
Set camera acquisition preferences.

setSystemVolumeType

setSystemVolumeType
int setSystemVolumeType
(TXSystemVolumeType type)
Setting the system volume type (for mobile OS).
@deprecated This API is not recommended after v9.5. Please use the startLocalAudio(quality) API in TRTCCloud instead, which param quality is used to decide audio quality.

TXSystemVolumeType(Deprecated)

TXSystemVolumeType(Deprecated)
System volume type.
Enum
Value
DESC
TXSystemVolumeTypeAuto
Not Defined
Auto
TXSystemVolumeTypeMedia
Not Defined
Media volume
TXSystemVolumeTypeVOIP
Not Defined
Call volume

TXAudioRoute

TXAudioRoute
Audio route (the route via which audio is played).
Audio route is the route (speaker or receiver) via which audio is played. It applies only to mobile devices such as mobile phones.
A mobile phone has two speakers: one at the top (receiver) and the other the bottom.
If the audio route is set to the receiver, the volume is relatively low, and audio can be heard only when the phone is put near the ear. This mode has a high level of privacy and is suitable for answering calls.
If the audio route is set to the speaker, the volume is relatively high, and there is no need to put the phone near the ear. This mode enables the "hands-free" feature.
Enum
Value
DESC
TXAudioRouteSpeakerphone
Not Defined
Speakerphone: the speaker at the bottom is used for playback (hands-free). With relatively high volume, it is used to play music out loud.
TXAudioRouteEarpiece
Not Defined
Earpiece: the receiver at the top is used for playback. With relatively low volume, it is suitable for call scenarios that require privacy.

TXCameraCaptureMode

TXCameraCaptureMode
Camera acquisition preferences.
This enum is used to set camera acquisition parameters.
Enum
Value
DESC
TXCameraResolutionStrategyAuto
Not Defined
Auto adjustment of camera capture parameters.
SDK selects the appropriate camera output parameters according to the actual acquisition device performance and network situation, and maintains a balance between device performance and video preview quality.
TXCameraResolutionStrategyPerformance
Not Defined
Give priority to equipment performance.
SDK selects the closest camera output parameters according to the user's encoder resolution and frame rate, so as to ensure the performance of the device.
TXCameraResolutionStrategyHighQuality
Not Defined
Give priority to the quality of video preview.
SDK selects higher camera output parameters to improve the quality of preview video. In this case, it will consume more CPU and memory to do video preprocessing.
TXCameraCaptureManual
Not Defined
Allows the user to set the width and height of the video captured by the local camera.

TXCameraCaptureParam

TXCameraCaptureParam
Camera acquisition parameters.
This setting determines the quality of the local preview image.
EnumType
DESC
height
Field description: height of acquired image
mode
Field description: camera acquisition preferences,please see TXCameraCaptureMode
width
Field description: width of acquired image

Bantuan dan Dukungan

Apakah halaman ini membantu?

masukan